260 Series Cage Clamp DIN Rail Terminal Blocks (WAGO Compatible Substitute):
260-301, 260-331.
261-301, 261-331.
262-301, 262-331.
Basic Info
- Model No.: 260-331
- Type: Single pole 4-wire feed-through terminal (2 inlet + 2 outlet, same potential)
- Mounting: 35mm DIN rail / screw panel mounting (Φ3.2mm fixing hole)
- Width: 8mm | Height: 17mm | Depth: 25.1mm
- Color: Standard grey; optional blue (neutral), yellow-green (earth ground)
Electrical Parameters
- Rated Current (IEC): 18A | Rated Current (UL): 10A
- Rated Voltage (IEC): 400V | Rated Voltage (UL): 300V
- Impulse withstand voltage: 6kV
- Wire cross section: 0.08 ~ 1.5mm² (solid & flexible cable)
- AWG range: 28AWG – 16AWG
Material & Environment
- Housing: PA66 flame retardant V0 nylon
- Conductive part: High-conductivity copper with nickel plating
- Spring: Stainless steel anti-fatigue cage spring
- Operating temperature: -60℃ ~ +105℃ long-term
Trade Terms
- MOQ: 100pcs for stock items
- Lead time: 3-7 days for stock, 10-15 days for OEM customized orders
- Payment: T/T, L/C, Western Union
- Shipping port: Ningbo / Shanghai
四、Core Advantages
- Perfect WAGO 260-331 replacement
Same installation size, wiring structure and electrical performance as original WAGO 260-331, direct interchange without cabinet redesign, greatly reduce your procurement cost.
- 4-hole two-in-two-out parallel wiring design
Four wiring cavities communicate mutually, realize one-potential multi-line shunting, eliminate messy sub-wire boxes inside control panels, tidy wiring layout.
- Reliable cage clamp spring connection
Tool-operated side push-in wiring, no screws to tighten; stainless steel spring provides constant clamping force, anti-vibration, anti-thermal expansion, zero maintenance after installation, suitable for long-term industrial operation.
- Wide wire compatibility
Works with solid hard wire and flexible multi-strand wire without pre-crimping lugs, save pre-processing labor cost on site.
- Dual installation mode
Equipped with fixing flange with 3.2mm hole for screw panel mounting; compatible with standard 35mm DIN rail for quick modular assembly.
- High safety & long service life
V0 flame-retardant PA66 shell, anti-aging, corrosion-resistant copper conductor, wide temperature range adapts indoor and semi-outdoor control equipment.
- Complete matching accessories
Support jumper bars, separator end stoppers, printable marking strips for circuit marking and series connection.
五、Full Technical Specification Table
| Item | Parameter |
|---|---|
| Product Model | 260-331 4-conductor feed-through terminal |
| Wiring Method | Side entry cage clamp spring connection |
| Number of Wiring Ports | 4 ports (2 input, 2 output) |
| Nominal Width | 8 mm |
| Applicable Wire | 0.08–1.5 mm² solid / flexible wire |
| AWG Standard | 28 AWG ~ 16 AWG |
| IEC Rated Current/Voltage | 18A / 400V |
| UL Rated Current/Voltage | 10A / 300V |
| Dielectric Strength | 6kV impulse voltage resistance |
| Mounting Way | DIN 35 rail mount + screw flange mount |
| Fixing Hole Diameter | Φ3.2 mm |
| Housing Material | PA66 V0 flame retardant polyamide |
| Conductive Material | Nickel-plated brass |
| Spring Material | Anti-fatigue stainless steel |
| Working Temperature Range | -60℃ ~ +105℃ continuous |
| Standard Color | Light Grey |
| Optional Colors | Blue (260-334), Yellow-Green (260-337) |
| Supporting Accessories | 260-361 separator, TD-1.5 jumper bar, marker label |
| Industry Certificates | UL, CE, IEC 60947, ROHS, REACH |
六、Application Scenarios
- Industrial PLC control cabinet signal wiring & shunting
- Building automation, HVAC air conditioning control system
- Sensor, solenoid valve, low-voltage control circuit distribution
- Small equipment power distribution junction
- Indoor lighting control panel, elevator control wiring
- Solar small junction box low voltage signal connection
- Instrument & meter internal wire parallel connection
七、Operation Guide
- Strip wire insulation for 6–7mm, clean burrs of flexible wire ends
- Insert flat screwdriver into the top operation slot, press down to open spring cavity
- Insert stripped wire fully into the side wiring hole
- Release screwdriver, stainless steel spring automatically clamps the wire tightly
- Pull wire slightly to check stable connection; 4 ports share same potential for parallel wiring
- Install terminal onto 35mm DIN rail or fix via flange screw hole on panel
八、Matching Accessories
- 260-361 End Separator / Partition Plate: Insulate adjacent terminals for safety isolation
- TD-1.5 Jumper Bar: Quick series connection of multiple 260 series terminals for same-potential distribution
- Printable Marking Strips: Custom circuit number printing for easy maintenance identification
- 209-123 Mounting Base: For panel surface installation without DIN rail