Control-panel builders who assemble signal isolators, transmitters and interface modules need two things to line up: a standard housing that snaps onto DIN rail, and a reliable PCB terminal connection inside it. We now supply both together — a modular DIN rail controller enclosure in ten colors, matched with a 5.00 mm pitch PCB terminal plug and needle set that ships as one kit.
Modular Controller Enclosures: Snap On, Color Code, Ship Faster
The housings are built for electronics modules — signal isolators, transmitters, intrinsic-safety barriers, relay and driver boards. Each shell clips onto 35 mm DIN rail without tools, and the two-part body opens from the front so the PCB slides in and locks in seconds.
- Four widths — 12.5, 17.5, 22.5 and 45 mm — match anything from a single-channel isolator to a two-module assembly
- 10 stock colors — green, yellow, blue, red, grey, white, black and more, so an entire cabinet can be color-coded by function or voltage class
- Footprint-compatible with Phoenix ME / MCR series housings — drop into existing panels; see our PLC housing & instrument enclosure and MCR-C-T-UI-E replacement enclosure
- OEM options — custom colors, printed logos, vent slots and cable exits; more details in the DIN rail plastic enclosure guide
| Width | Outline H × D (mm) | Inner PCB space | Variants |
|---|---|---|---|
| 12.5 mm | 99.5 × 114.4 mm | 46 × 78.5 mm | with or without heat-dissipation slots |
| 17.5 mm | 99.5 × 114.4 mm | 46 × 78.5 mm | — |
| 22.5 mm | 100.6 × 117 mm | 45.8 × 55.8 mm | small-label or long-label area (45.8 × 67 mm) |
| 45 mm | 100.6 × 117 mm | double width | houses two modules side by side |
Two practical details from the catalog: the 12.5 mm version comes with or without heat-dissipation slots for hotter driver circuits, and the 22.5 mm version is available with a long label area (45.8 × 67 mm) so terminal markings stay readable after installation.
5.00 mm Pitch Plug & Needle Set: One Kit, Eight Parts
Inside the housing, the field wiring connects through a 5.00 mm pitch plug-in terminal set. As the exploded view below shows, one kit contains the plugs and the left/right needles that mate with them:
| Part | Role in the set | Qty |
|---|---|---|
| YC110-500 | Plug, 5.00 mm pitch | 4 |
| YE1010-500L | Left needle terminal, 5.00 mm pitch | 2 |
| YE1010-500R | Right needle terminal, 5.00 mm pitch | 2 |
Ratings, wire ranges and dimensional drawings for the 5.00 mm pitch series are listed on the plug-in PCB terminal block page. Not sure which pitch fits your board? Our PCB terminal block selection guide compares screw, plug-in and barrier types side by side.
Why Specify the Pre-Matched Set
- No mating surprises — plugs and needles come from the same 5.00 mm pitch family, so fit and alignment are guaranteed
- Faster assembly — one part number covers the whole connection instead of three
- One color & material batch — plugs, needles and housing are produced together
- Lower landed cost — kit pricing beats ordering terminals piece by piece
Typical Applications
- Signal isolators, transmitters and intrinsic-safety barriers in machine-control cabinets
- Interface and relay modules where field wiring must be unplugged for service
- PLC I/O marshalling panels and instrumentation housings
- Building-automation and process-control modules mounted on 35 mm DIN rail
OEM & Customization
Good Electric manufactures both the housings and the terminal sets in-house (ISO 9001 / ISO 14001; most series carry UL, TÜV, CE, RoHS and CCC approvals). We support custom housing colors and logo printing from small trial orders, and kits can be packed per-cabinet to match your BOM. Full specifications for every series are in the PCB terminal blocks catalog.
Send us your module drawing or BOM — quotation within 24 hours, samples before mass production.
